jgc@panda.UUCP (Joseph G. Chin) (08/27/85)
I have seen a few articles in using Ascii Express to set up some Vt52 terminal simulation. There has been reference to using 5 & 6 to set this up. I'm not quite sure what this means. I have this soft- ware but I don't have the manuals. I'd appreciate it if someone could explain how to set this up. I'm looking for a Vt100 or Vt220 setup. I'm also confused in setting up the software to autocall and autolink. Thanks in advance! jc
heins@isucs1.UUCP (09/03/85)
/***** isucs1:net.micro.apple / panda!jgc / 3:14 pm Aug 30, 1985 */
I have seen a few articles in using Ascii Express to set up
some Vt52 terminal simulation. There has been reference to using 5 &
6 to set this up. I'm not quite sure what this means. I have this soft-
ware but I don't have the manuals. I'd appreciate it if someone could
explain how to set this up. I'm looking for a Vt100 or Vt220 setup. I'm
also confused in setting up the software to autocall and autolink. Thanks
in advance!
jc
As far as I know there is no way to emulate the VT100 with AE Pro (possibly
the only major complaint I have about it) You really MUST have the AE
documentation and read it in order to understand how to use the AE terminal
emulation and many other features.
P.S. It is not wise to admit you don't have the manual or people will flame
on you. Piracy discussions are frowned upon here.
Lee Heins @ Iowa State
UUCP: {umn-cs!csu-cs!okstate}!isucs1!heins
CSNET: heins@iowa-state
/* ---------- */