wa6wow@nvuxb.UUCP (P L Miller) (02/28/86)
Does anyone have a TERMINFO for an Apple IIe using the Apple Access II software. It is supposed to emulate a vt100. The vt100 TERMINFO works ok on a real vt100 but not on the Apple emulation. I would also like to know of any documentation which describes the process of writing TERMINFOs. Paul Miller ihnp4!nvuxb!wa6wow 201-758-5578
larryv@chinet.UUCP (Larry W. Virden) (03/08/86)
What I am looking for is termcaps/terminfo info for a IIe/IIc WITHOUT a terminal "emulator" as such - a friend is using the firmware within a Prometheus card to talk to work. It has data capture and transfer capabilities, but does no emulation; just vanilla Apple. -- Larry W. Virden A user of the Free Access chinet board... ...!chinet!larryv
gwyn@brl-smoke.UUCP (03/15/86)
>What I am looking for is termcaps/terminfo info for a IIe/IIc WITHOUT a >terminal "emulator" as such - a friend is using the firmware within a >Prometheus card to talk to work. It has data capture and transfer >capabilities, but does no emulation; just vanilla Apple. # # Apple //e with 80-column card # The modem interface is permitted to discard LF (maybe DC1), otherwise # passing characters to the 80-column firmware via COUT (PR#3 assumed). # Auto-wrap does not work right due to newline scrolling delay, which also # requires that you set "stty cr2". # Note: Cursor addressing is only available via the Pascal V1.1 entry, # not via the BASIC PR#3 hook. All this nonsense can be avoided only by # using a terminal emulation program instead of the built-in firmware. ab|apple2e|Apple //e:\ :bl=^G:bw:cd=4*^K:ce=4^]:cl=100^L:co#80:ho=^Y:is=^R^N:kd=^J:kl=^H:\ :kr=^U:ku=^K:li#24:me=^N:mr=^O:ms:nw=100\r:rs=^R^N:se=^N:sf=^W:so=^O:\ :sr=^V:up=^_:\ :bs:nc: ap|apple2e-p|Apple //e via Pascal:\ :cm=^^%r%+ %+ :tc=apple2e: