ix742@sdcc6.UUCP (James Hayes) (04/29/86)
Amid reports of success stories using DCOM 3.2x on Apple //c's,
two people have reported that a problem exists. Here is a letter:
-----
But, when connected, the first column of characters is still thrown
out. I managed to get through to the net here at Tech one time,
but when I typed my command and it connected here to the Pyramid,
the program started sending out an inverse line up the left side
of the screen and no commands worked.
It had done this earlier before dialing, if I had reset things by
turning the modem on and off. (the command to do this normally, "atz"
didn't work because after one time, it froze the screen - in fact, it
returned the "k" of the "ok" reply, which means that the program is
also cutting off the first column when it is only local.)
-----
If ANYONE has had this problem, please send mail. If anyone has had
this problem and FIXED it, please send mail. I would like to have
this solved before the next distribution.
VIDEX 80 COLUMN CARD DRIVER:
The videx screen driver is in it's final testing stages, as well
as a keyboard driver that can use a non-lowercase keyboard (with
the shift key mod) on real early ]['s and ][+'s.
Thanks for the help!
-Jim Hayes, UCSD
ARPA: hayes@UCSD.ARPA
UUCP: {ucbvax, ihnp4, decvax, etc...}!sdcsvax!hayes