[net.micro.atari] possible ST upgrade idea

tucker@ccvaxa.UUCP (12/08/85)

    I thought some of you might be interested to know that Philips
and Signetics have anounced they will start producing a CPU called
the 68070.  It will be fully 68000/68010 code and bus compatible
and have an on chip memory management unit, 2 high speed DMA channels,
serial port, I2C bus interface and three counter timer functions in
one 84pin package (the extra pins are for the peripheral interfaces).
It will use low power CHMOS so as not to draw more power than your
68000 already does.  It will have the instruction continue capacity
of the 68010 for virtual memory.
    This would make a nice (and easy) upgrade to any ST (or Amiga).
Just pull out your 68000 and put the 68070 on a little board that
maps all of the 68000 bus pins to the right places.  I hope some 
hardware hacker out there is listening.

Tim Tucker
..ucbvax!ihnp4!uiucdcs!ccvaxa!tucker
tucker@gswd-vms.ARPA

Note: I'm not an employee of Philips or Signetics and my intent was
not to advertise their products.