jjv3345@ritcv.UUCP (Jeff Van Epps) (01/17/86)
[] I'm having a problem using C-Kermit on RIT's 4.2bsd system to talk to the Chameleon Terminal Emulator's Kermit on my Atari 800XL. Packets get sent down to the Atari, but the first time it has to write to the disk (after about 10K of data) things get messed up. Possibly the disk I/O is taking too long and the host starts re-sending stuff before the Atari is ready. Possibly Chameleon just gets confused. Possibly *I'm* confused. Somehow packets start appearing on the screen. After about 10 tries, C-Kermit realizes nobody is responding and times out, leaving me to tell Chameleon to quit file transfer and resume terminal mode. Has anyone else experienced this? Any suggested solutions? thanx, Jeff Van Epps ritcv!jjv3345
Bittner.ES@XEROX.ARPA (01/21/86)
To: Jeff Van Epps - your return address is too long for my mail system. Jeff, I had the same problem with Compuserve and Hometerm. I found an advice file on Compuserve which mentioned interference from the printer (or printer driver). I unplugged my parallel printer from the 850 interface BEFORE booting. It worked. If you are superstitious give it a try. -Brenda