norm%Rand-Unix@sri-unix.UUCP (06/19/83)
Does anyone (using the current version of Wordstar) know how to get rid of the hard carriage returns?
burgin@ecsvax.UUCP (Robert Burgin) (04/13/86)
Is it possible to access subdirectories on a hard disk using Word Star (IBM PC)? In other words, can Word Star access a file that is not on the same directory as Word Star itself? Thanks for any ideas or words of advice.
phil@mp-dixie.UUCP (Phil Glatz) (04/17/86)
In article <1408@ecsvax.UUCP>, burgin@ecsvax.UUCP (Robert Burgin) writes: > > Is it possible to access subdirectories on a hard disk using > Word Star (IBM PC)? In other words, can Word Star access a file that > is not on the same directory as Word Star itself? > Yes - try "WordStar for the PCjr". It was never promoted much by MicroPro, but it does have some significant advantages over 3.3. In addition to full path support, there are no overlays, just one big EXE file! Runs a LOT faster and has 40/80 column modes and more function key support. On the downside, there is no CorrectStar or MailMerge. Works well for programming (its the word processor that was used by the writers of WordStar 2000). It is available through LifeStyles Software Inc. (they have an 800 numb). It DOES have a "migration protection" scheme that won't let it run on anything but a PCjr, but is a simple one-byte patch to make it work on your regular PC. The patch info is available on many BBS's if you can't figure it out yourself. -- phil ... Phil Glatz, MicroPro Product Development {dual,hplabs,glacier,lll-crq}!well!micropro!mp-dixie!phil
marino@hcradm.UUCP (Marino Vereecke) (04/18/86)
The Wordstar overlay files must be in the same directory as the file you wish to edit. There is a public domain software product available called Dpath, which is an enhancement of the PATH command, that will allow you to have all your Wordstar program files in one directory while you edit or create a file in another directory. The problem with the PATH command is that doesn't work once you have invoked Wordstar. With the PATH command you can have your Wordstar files in one directory and invoke Wordstar in another directory but then Wordstar just sits there because it doesn't know where the overlay files are.
aniekan@usc-oberon.UUCP (Aniekan) (04/19/86)
> > Is it possible to access subdirectories on a hard disk using > Word Star (IBM PC)? In other words, can Word Star access a file that > is not on the same directory as Word Star itself? > > Thanks for any ideas or words of advice. If I remember correctly I think you can use: c:\firstsub\secondsub\filename where "firstsub" is the name of the first subdirectory, "secondsub" is the 2nd subdirectory and then the name of you file. Also what version of WS are you using? I haven't used WS in a while so this might not be correct.
few@well.UUCP (04/19/86)
In article <137@mp-dixie.UUCP> phil@mp-dixie.UUCP (Phil Glatz) writes: >In article <1408@ecsvax.UUCP>, burgin@ecsvax.UUCP (Robert Burgin) writes: >> Is it possible to access subdirectories on a hard disk using >> Word Star (IBM PC)? > Yes - try "WordStar for the PCjr". It was never promoted much by >MicroPro, but it does have some significant advantages over 3.3. >... >It DOES have a "migration protection" scheme that won't let it run on >anything but a PCjr, but is a simple one-byte patch to make it work on >your regular PC. The patch info is available on many BBS's if you >can't figure it out yourself. >... Phil Glatz, MicroPro Product Development >{dual,hplabs,glacier,lll-crq}!well!micropro!mp-dixie!phil Since Phil (hiya buddy) left out the patch (probably in self-protection mode), and since I no longer work there, here's the patch: ren ws.exe ws.e debug ws.e e 3cbf eb w q ren ws.e ws.exe -- Frank Whaley EFS Management Software, Inc. UUCP: hplabs! ihnp4!ptsfa! seismo!lll-crg!well!few ARPA: well!few@lll-crg.ARPA
werner@aecom.UUCP (Craig Werner) (04/21/86)
> The Wordstar overlay files must be in the same directory as the file > you wish to edit. OR on Disk A: I keep a copy of Wordstar on a Floppy for jsut such a purpose. What I do is leave WordStar, cd to the correct directory, start it up again, and switch to drive B: or C: with the L command. It automatically goes to the current working directory on that drive without problems. This requires, of course, that you still have Wordstar sitting on a Floppy somewhere, but it's always worked for me! -- Craig Werner !philabs!aecom!werner (1935-14E Eastchester Rd., Bronx NY 10461, 212-931-2517) I'll also entertain gifts,knick-knacks,offers of money, & proposals of marriage
edg@micropro.UUCP (Ed Greenberg) (04/22/86)
In article <2435@aecom.UUCP> werner@aecom.UUCP (Craig Werner) writes: >> The Wordstar overlay files must be in the same directory as the file >> you wish to edit. > > OR on Disk A: > I keep a copy of Wordstar on a Floppy for jsut such a purpose. > What I do is leave WordStar, cd to the correct directory, start it >up again, and switch to drive B: or C: with the L command. It automatically >goes to the current working directory on that drive without problems. > This requires, of course, that you still have Wordstar sitting on >a Floppy somewhere, but it's always worked for me! > Craig Werner Craig is almost correct. The disk that he refers to as A: is actually patchable. In WINSTALL, you can go to the Menu of WordStar Features and change the "Default Disk Drive." Thus, you can put those overlays in the root directory of ANY drive. Consider that the drive could be a RAMdisk or a subdirectory that has been brought to root level with the subst(DOS 3.1) command. Also, if you put the drive in question on your path, then this setup will allow you to type "ws" from any directory anywhere and have it come up and run. If you use subst, don't forget to set LASTDRIVE in your CONFIG.SYS. Also, some versions of Install call the Default Disk Drive the "System" Disk Drive instead. Both patch the same address. -edg -- Ed Greenberg | {hplabs,glacier}!well!micropro!edg MicroPro International Corp. | {ucbvax,decwrl}!dual!micropro!edg San Rafael, California | {lll-crg,ptsfa}!micropro!edg