harlan@hardy.UUCP (07/19/86)
When trying to configure a Leading Edge PC with a 20 meg hard drive using an
Adeptec 2002A controller, problems are cropping up. When doing a
preliminary format, the response from the PC is "write buffer full".
When putting a preformatted drive (MS-DOS 3.1) in the system you get the
response "invalid drive", when trying to access the drive.
Has anyone attempted this configuration or offer some help?
--
Harlan Olson
Boulder, Colorado
WD0HTV
...{allegra|hao|ucbvax}nbires!nbisos!hardy!harlan (USENET)