werner@ut-ngp.UUCP (Werner Uhrig) (08/13/84)
# TERMCAP for Zenith Z100 without colour. # NOTE: cl is 'strange' because the Z100 at 1200 Baud mutilates seven chars # following the ESC-E. At 300 Baud only one char is mutilated. # I chose to insert ^H (BACKSPACE) because they don't cause a problem # when you use the same TERMCAP at either speed, as the Z100 ignores # a BACKSPACE when the cursor is at HOME (beginning of the screen). # Of course, I could be mistaken about any or all of this ... # # werner @ ut-ngp on UUCP and ARPA (let me know if 'buggy') # # modifications: # 84/7/29 WAS: cd=45*\EJ cl=\EE1234567 # created: 84/7/26 # # capabilites: automatic margins, backspace, 80 cols, 24 lines ; # mi: save to move in insert; ms: ?; no pt: no hard-tabs # graphics mode ae=end-alt-charset as=start-alt-charset # Char-definitions: cr=RETURN dc=DELETE nl=NEWLINE sr=ScrollReverse # cursor symbol & reverse video (se, so, vs, ve) # area clears cd=clEOS ce=clEOL cl=clScreen # insert/delete dl, al, ei, im # to effect cursor motions cm=curpos, nd, do, up, cm # z1|z100|h100|z-100|h-100|heath/zenith z-100 pc:\ :am:bs:co#80:li#24:mi:ms:\ :ae=\EG:as=\EF:\ :dc=\EN:sr=\EI:\ :se=\Eq:so=\Ep:vs=\Ex4:ve=\Ey4:\ :cd=55*\EJ:ce=\EK:cl=\EE^H^H^H^H^H^H^H:\ :dl=5*\EM:al=5*\EL:ei=\EO:im=\E@:\ :nd=\EC:do=\EB:up=\EA:cm=1\EY%+ %+ :\ :kh=\EH:ku=\EA:kd=\EB:kl=\ED:kr=\EC:kb=^H:\ :kn#10:k0=\EJ:k1=\ES:k2=\ET:k3=\EU:k4=\EV:\ :k5=\EW:k6=\EP:k7=\EQ:k8=\ER:k9=\E0I: