john@sol1.UUCP (john) (11/01/85)
Could someone please tell me what I'm doing wrong with gettytab.c
I'm trying to setup a speed table that cycles through 1200 baud then
300 baud and then 2400 baud.
It doesn't seem to be working for 2400 baud. And I'm having a tough
time finding the answer in the limited documentation.
Here is the code, minus the includes, and some commented out stuff.
struct tab {
char tname; /* this table name */
char nname; /* successor table name */
unsigned short iiflag; /* initial input mode */
unsigned short ioflag; /* initial output mode */
unsigned short icflag; /* initial control mode */
unsigned short ilflag; /* initial local mode */
unsigned short fiflag; /* final input mode */
unsigned short foflag; /* final output mode */
unsigned short fcflag; /* final control mode */
unsigned short flflag; /* final local mode */
char line; /* line discipline */
char *message; /* login message */
} uitab[] = {
/* TABLE 'e' - 'f' -- 1200,300: */
'e', 'f',
0, ONLRET|CR1|OPOST,
B1200|CREAD|CS8, ECHOK,
BRKINT|IGNPAR|ISTRIP|IXON|IXANY|ICRNL,
ONLCR|OPOST|TAB3,
B1200|CREAD|CS8, ISIG|ICANON|ECHOK,
0, "\n\rlogin: ",
/* TABLE 'f' - 'g' -- 300,2400: */
'f', 'g',
0, ONLRET|CR1|OPOST,
B300|CREAD|CS8, ECHOK,
BRKINT|IGNPAR|ISTRIP|IXON|IXANY|ICRNL,
ONLCR|OPOST|TAB3,
B300|CREAD|CS8, ISIG|ICANON|ECHOK,
0, "\n\rlogin: ",
/* TABLE 'g' - 'e' -- 2400,1200: */
'g', 'e',
0, ONLRET|CR1|OPOST,
B2400|CREAD|CS8, ECHOK,
BRKINT|IGNPAR|ISTRIP|IXON|IXANY|ICRNL,
ONLCR|OPOST|TAB3,
B2400|CREAD|CS8, ISIG|ICANON|ECHOK,
0, "\n\rlogin: ",
};
int n_uitab = sizeof uitab/sizeof uitab[0];
---------------------------------------
Any help would be greatly appreciated, as I've been struggling with
this for some time now.
John Korsmeyer @ THE SOLUTION
EMAIL: {akgua,ihnp4}!sol1!john