tomc@nugipsy.UUCP (Tom Cianflone) (11/01/86)
We are just recently getting into the use of
a laser printer and doing our tables with the
'tbl' preprocessor. When using the global
'box' command (put a box around the table)
it seems that the upper box corners are not
formed correctly, i.e., the lines don't touch.
The gap is barely noticable, but is there
nonetheless. Interestingly, the 'tbl' documentation,
which was done using 'tbl', also exhibits
the same problem. Is this is normal for 'tbl'?
Is there some fix for this?
Thanks
= = = = = = = = = = = = = = = =
=> Regards, Tom Cianflone @ Gould Computer Systems Division <=
=> in sunny Ft. Lauderdale, Florida <=
=> Electric Avenue: ...!{brl-bmd,pur-ee,sun}!gould!tcianflone <=
=> "Opinions above are mine, not my employer's." <=
= = = = = = = = = = = = = = = =