gary@ethos.UUCP (Gary J. Smith) (10/17/86)
Does anyone have a good termcap entry for Zenith's Z49 terminal?
Thanks in advance.
--
Gary J. Smith {ihnp4,mcnc,duke}!ethos!gary
====================================================================
5802 Garrett Rd, Durham, NC 27707 voice: 919-493-9575 data: 489-6496mark@ems.UUCP (Mark Colburn) (10/18/86)
I was wondering if there is anybody out there that has put together a terminfo entry for a Wyse-85 running in VT200-8 bit mode. I have tried, unsuccessfully, to get this to work several times. A generic VT200-8 bit terminfo entry would be fine too. There was a Wyse-85 termcap posted not long ago, however, that was for the VT100 mode. Please post, or e-mail (whichever is appropriate). Thanks in advance.
mark@ems.UUCP (Mark Colburn) (10/18/86)
it seems that my .signature file was not posted with my last article. Anyways here it is --- Mark H. Colburn UUCP: ihnp4!rosevax!ems!mark EMS/McGraw-Hill ATT: (612) 829-8200 9855 West 78th Street Eden Prairie, MN 55344
howardl@tekline.UUCP (Howard D. Leadmon) (10/23/86)
I too would be interested in any information, termcaps, etc.. on the WYSE terminals (WY-85,WY-75,WY-60). I am interested in the IBM lookalike WY-60 terminal, but haven't been able to get any info on it yet... Howard Leadmon PATH: ..cp1!tekline!howardl