ken@ihuxq.UUCP (12/05/83)
I ride all winter (excepting blizzards & icy roads--I may be
an idiot but I'm not suicidal) but here's some things to
remember if you're hanging it up for the season:
1. Fill the gas tank. This prevents corrosion from water
condensation.
2. Change the oil. The acids in old oil will eat at things,
& crud may deposit all over the filter screen if
you don't.
3. Clean & polish it. Dirt left on will corrode the finish
& be a definite bummer when you take it out that 1st spring
day. Armor-all works nicely on exposed rubber & vinyl.
4. Remove the battery, make sure the water level is OK,
& store. Keep well charged if possible. Obviously.
5. Make sure the tires are at correct pressure. If they're
low, flat spots could develop where they contact the ground.
6. Pull the plug(s), insert a drop or 2 of oil, replace them.
Kick it over once or twice (ignition off!).
This will coat the cylinder(s), deterring rust.
Salute farewell with full military honors.
--
*** ***
JE MAINTIENDRAI ***** *****
****** ******
ken perlow ***** *****
(312)979-7261 ** ** ** **
..ihnp4!ihuxq!ken *** ***rsp@opus.UUCP (12/08/83)
One other thing before storing a bike - to that full gas tank add some gasoline stabilizer. Else by spring the carburetors may be gummed up with varnish. All gasoline has volatile components that evaporate leaving heavier components behind. This is especially true of winter blend gasolines. So be sure to add the stabilizer before putting 'er away for storage. Russ "I ride all year" Panneton NBI Inc. Boulder CO ..!opus!rsp