guest2@smu.UUCP (12/04/84)
I am making good progress on it. However I havn't tried it yet on 22-bit . We have it running on 4 RK05's and 1 RL02. Keep in mind the following: 1. Change the RL02 controller to 18-bit for the time being. 2. Perhaps do something on the backplane also. 3. Get an old PDP11 handbook and find the bootstrap for RL02. 4. Boot with line-time-clock off, put a switch on the front with that and change the multifunction board accordingly. I could not get it to boot the standard 173000G way yet. 5. Keep in mind that the generic system of 2.9 is setup for the RL01 After a while I found out that messing my file system was caused by that! Do an adb -w /dev/unix on swplo and nswap and set them to 17000 and 3450 or so. 6. As soon as I have my acts together for 22-bit I will inform you. sincerly, smu!txsil!gertjan Gertjan Vinkesteyn Summer Institute of Linguestics 7500 W Camp Wisdom Rd Dallas TX 75236 (214) 298-3331 (currently guest at smu because of installing notes on our 68K system