ron@unrvax.UUCP (Ron Sheen) (10/10/85)
I am posting this for a friend who does not have access to the net, please reply directly to seismo!uw70!steve -------------------------------------------------------------- Our PDP 11/70 is hanging in a pause state whenever the Harvard/CSS 2.9 is booted and our Interlan NI 1010A Ethernet controller board is on the UNIBUS. This happens if the device driver is configured into the system or not. Changing the CSR address of the device did not change the symptoms. The kernel boots and runs fine if the device is not in the UNIBUS. There are no problems running 2.8 with the board installed (2.8 does not use the board, but this shows there are not UNIBUS problems). Any suggestions will be apreciated.