phil@amd.UUCP (Phil Ngai) (08/18/84)
I've been having trouble running vnews on my h19. It seems to
turn off the cursor, move it to the status line, print the
newsgroup, and forget to move it back. There were claims my
h19 termcap was incorrect but I do not believe this because I
compared it with the h19 manual and the strings hardcoded into
sysline. Sysline works fine although I do not usually run it
because of the extra load.
This is on a VAX-11/750 running 4.2bsd. It happens at both 9600
baud and 1200 baud.
--
amd70 is dead, tell a friend
Phil Ngai (408) 982-6554
UUCPnet: {ucbvax,decwrl,ihnp4,allegra,intelca}!amd!phil
ARPAnet: amd!phil@decwrl.ARPA